ShanghaiTech University Knowledge Management System
A mechanical solution of self-powered SSHI interface for piezoelectric energy harvesting systems | |
2015 | |
会议录名称 | ACTIVE AND PASSIVE SMART STRUCTURES AND INTEGRATED SYSTEMS 2015 |
卷号 | 9431 |
发表状态 | 已发表 |
DOI | 10.1117/12.2084208 |
摘要 | The synchronized switch interface circuits, e. g., synchronized switch harvesting on inductor (SSHI), can significantly enhance the harvesting capability of piezoelectric energy harvesting (PEH) systems. In these power conditioning circuits, the piezoelectric voltage is flipped with respect to a bias voltage at the instants when the piezoelectric element is at maximum deforming positions. Voltage peak detection and in time switching action are required for implementing these functions. The state-of-the-art solutions are mostly realized by electronic methods, i. e., both functions are carried out by electronic comparators and electronic switches. However, the peak detectors usually introduce switching phase lag; while the electronic switches function only when the vibration magnitude is above a threshold level. When the vibration is lower than such threshold, the SSHI interface shows no improvement. In this paper, we propose a mechanical solution for constructing the self-powered SSHI interface for PEH systems. This technique is realized by installing a low cost vibration sensor switch (VSS) at the free end of a piezoelectric cantilever. It senses the maximum deflecting places of the cantilever and automatically carries out synchronized switching actions. Compared to the existing electronic solutions, this mechanical solution is compact and has relative low switching threshold. Therefore, with this self-powered solution, the advantage of SSHI interface circuit can be sufficiently released, in particular, at low level vibration. Experiment shows the feasibility of this mechanical solution. The advantages and limitations are also discussed in this paper. |
关键词 | piezoelectric energy harvesting synchronized switch interface circuits self-powered SSHI vibration sensor switch |
出版地 | 1000 20TH ST, PO BOX 10, BELLINGHAM, WA 98227-0010 USA |
会议地点 | San Diego, CA, United states |
收录类别 | CPCI ; EI |
语种 | 英语 |
WOS研究方向 | Engineering ; Materials Science ; Optics |
WOS类目 | Engineering, Electrical & Electronic ; Materials Science, Multidisciplinary ; Optics |
WOS记录号 | WOS:000357640200041 |
出版者 | SPIE-INT SOC OPTICAL ENGINEERING |
EI入藏号 | 20154901645782 |
EI主题词 | Energy harvesting ; Integrated control ; Logic circuits ; Nanocantilevers ; Piezoelectricity ; Semiconductor switches ; Switching ; Synchronization ; Ventilation exhausts |
EI分类号 | Energy Conversion Issues:525.5 ; Pipe, Piping and Pipelines:619.1 ; Electricity: Basic Concepts and Phenomena:701.1 ; Semiconductor Devices and Integrated Circuits:714.2 ; Logic Elements:721.2 ; Control Systems:731.1 ; Nanotechnology:761 ; Solid State Physics:933 ; Systems Science:961 |
WOS关键词 | CONVERSION |
原始文献类型 | Proceedings Paper |
引用统计 | 正在获取...
|
文献类型 | 会议论文 |
条目标识符 | https://kms.shanghaitech.edu.cn/handle/2MSLDSTB/2326 |
专题 | 信息科学与技术学院 信息科学与技术学院_PI研究组_梁俊睿组 信息科学与技术学院_硕士生 |
通讯作者 | Liang, Junrui |
作者单位 | ShanghaiTech Univ, Sch Informat Sci & Technol, Shanghai 200031, Peoples R China |
第一作者单位 | 信息科学与技术学院 |
通讯作者单位 | 信息科学与技术学院 |
第一作者的第一单位 | 信息科学与技术学院 |
推荐引用方式 GB/T 7714 | Liu, Haili,Ge, Cong,Liang, Junrui. A mechanical solution of self-powered SSHI interface for piezoelectric energy harvesting systems[C]. 1000 20TH ST, PO BOX 10, BELLINGHAM, WA 98227-0010 USA:SPIE-INT SOC OPTICAL ENGINEERING,2015. |
条目包含的文件 | ||||||
文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 |
修改评论
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。