中文版 | English

个人主页

关键词云

成果统计

合作作者[TOP 5]

  • 武颖娜

    合作成果数：32

  • 翟梓融

    合作成果数：21

  • Wang, Hao

    合作成果数：18

  • Hu, Qing-Miao

    合作成果数：14

  • Hao, Y. L.

    合作成果数：13

访问统计


  总访问量
 5969
  访问来源
    内部： 37
    外部： 5932
    国内： 5604
    国外： 365

  年访问量
 839
  访问来源
    内部： 2
    外部： 837
    国内： 802
    国外： 37

  月访问量
 81
  访问来源
    内部： 0
    外部： 81
    国内： 75
    国外： 6

访问量

访问量

1. Preparation of High-Stability Ceramic Slurry with Gel Behavior for.. [3224]
2. Composition equivalents of stainless steels understood via gamma s.. [1140]
3. 基于三周期极小曲面的换热核心单元结构、制作方法及换热器 [909]
4. Novel two-dimensional Ti3C2Tx/Ni-spheres hybrids with enhanced mic.. [869]
5. Precipitate mediated plasticity at twin boundary in Nickel-based s.. [869]
6. Ultrastrong nanotwinned titanium alloys through additive manufactu.. [839]
7. Mesoscopic evolution of molten pool during selective laser melting.. [781]
8. Enhancing the mechanical property of laser powder bed fusion CoCrM.. [768]
9. Strong sequentially bridged MXene sheets [747]
10. On the orientation dependent microstructure and mechanical behavio.. [727]
11. 一种基于选区激光熔化技术的隔热板结构及其成型方法 [713]
12. Mechanical properties and toughening mechanisms of highly textured.. [695]
13. Effect of high preheating on the microstructure and mechanical pro.. [686]
14. Impact of Laser Power and Scanning Velocity on Microstructure and .. [656]
15. ArCo: Attention-reinforced transformer with contrastive learning f.. [651]
16. Creep properties of Ti–48Al–2Cr–2Nb alloy having similarly orie.. [640]
17. 航空发动机涡轮叶片的失效分析与检测技术 [630]
18. Origin of strain localization at twin boundary in Inconel 718 supe.. [624]
19. Automatically recognizing and grading spangle on the galvanized st.. [617]
20. Bi-continuous Mg-Ti interpenetrating-phase composite as a partiall.. [606]
21. Strong and tough magnesium-MAX phase composites with nacre-like la.. [604]
22. Real-time penetration recognition based on voltage signal in K-TIG.. [576]
23. Multimodal Local Representation Learning For Multi-Task Blastocyst.. [571]
24. The endless search for better alloys [547]
25. A strong, lightweight, and damping cermet material with a nacre-li.. [545]
26. Multi-ring Beam Sensing System for Three-dimensional Measurement o.. [545]
27. Tailoring high-temperature mechanical properties of laser powder b.. [527]
28. Prototype calibration for long tailed recognition [516]
29. Bi-continuous Mg-Ti interpenetrating-phase composite as a partiall.. [506]
30. Accuracy improvement of a multi-ring beam structured inner surface.. [501]
31. Effects of oxygen on microstructure and mechanical properties of s.. [495]
32. Microstructure and corrosion behavior of chromium-rich stainless s.. [484]
33. Refinement of α′ Martensite by Oxygen in Selective Laser Melted .. [464]
34. An intelligent process parameters optimization approach for direct.. [433]
35. Fabrication and property research of a new 3D-Printable magnetorhe.. [429]
36. VQGNet: An Unsupervised Defect Detection Approach for Complex Text.. [426]
37. On the role of grain morphology in the mechanical behavior of lase.. [415]
38. Pseudo Sub-grain Formation and Evolution in a Ti3Al-Nb .. [409]
39. Additive manufacturing of a new titanium alloy with tunable micros.. [408]
40. Microstructure and mechanical property comparison of Inconel alloy.. [402]
41. A novel bilateral stream neural network for melt pool monitoring d.. [386]
42. Corrigendum to "Bi-continuous Mg-Ti interpenetrating-phase composi.. [378]
43. Heterogeneous structure architected by additive manufacturing: fac.. [350]
44. Dynamics optimization of coupling atomization process in an inject.. [347]
45. Observation of {2 1 1} β deformation twins in laser powder bed fu.. [285]
46. Annealing-induced improvement in thermal conductivity of Si3N4 spe.. [239]
47. 3DSignDiff [182]
48. The nucleation and migration mechanisms of asymmetric {112‾3} twi.. [104]
49. The significant impact of hot isostatic pressing on the corrosion .. [89]
50. Achieving equiaxed grain microstructure and isotropic properties i.. [58]
51. Fracture toughness enhancement of a laser powder bed fusion manufa.. [47]
52. Magnetic field-assisted 3D printing of anisotropic magnetorheologi.. [36]
53. Numerical simulation and experimental investigation of the influen.. [27]

下载量

1. Preparation of High-Stability Ceramic Slurry with Gel Behavior for.. [1970]
2. Composition equivalents of stainless steels understood via gamma s.. [261]
3. Accuracy improvement of a multi-ring beam structured inner surface.. [66]
4. VQGNet: An Unsupervised Defect Detection Approach for Complex Text.. [24]
5. 3DSignDiff [21]
6. Novel two-dimensional Ti3C2Tx/Ni-spheres hybrids with enhanced mic.. [15]
7. Fracture toughness enhancement of a laser powder bed fusion manufa.. [15]
8. Additive manufacturing of a new titanium alloy with tunable micros.. [13]
9. Microstructure and mechanical property comparison of Inconel alloy.. [10]
10. On the role of grain morphology in the mechanical behavior of lase.. [9]
11. Multimodal Local Representation Learning For Multi-Task Blastocyst.. [7]
12. Effect of high preheating on the microstructure and mechanical pro.. [6]
13. Annealing-induced improvement in thermal conductivity of Si3N4 spe.. [5]
14. Achieving equiaxed grain microstructure and isotropic properties i.. [5]
15. 一种基于选区激光熔化技术的隔热板结构及其成型方法 [4]
16. Origin of strain localization at twin boundary in Inconel 718 supe.. [4]
17. Impact of Laser Power and Scanning Velocity on Microstructure and .. [4]
18. Dynamics optimization of coupling atomization process in an inject.. [4]
19. Heterogeneous structure architected by additive manufacturing: fac.. [4]
20. An intelligent process parameters optimization approach for direct.. [3]
21. Fabrication and property research of a new 3D-Printable magnetorhe.. [3]
22. A novel bilateral stream neural network for melt pool monitoring d.. [3]
23. The nucleation and migration mechanisms of asymmetric {112‾3} twi.. [3]
24. The significant impact of hot isostatic pressing on the corrosion .. [3]
25. Strong sequentially bridged MXene sheets [2]
26. 航空发动机涡轮叶片的失效分析与检测技术 [2]
27. The endless search for better alloys [2]
28. Strong and tough magnesium-MAX phase composites with nacre-like la.. [2]
29. Prototype calibration for long tailed recognition [2]
30. Microstructure and corrosion behavior of chromium-rich stainless s.. [2]
31. Observation of {2 1 1} β deformation twins in laser powder bed fu.. [2]
32. Magnetic field-assisted 3D printing of anisotropic magnetorheologi.. [2]
33. Numerical simulation and experimental investigation of the influen.. [2]
34. Mesoscopic evolution of molten pool during selective laser melting.. [1]
35. Ultrastrong nanotwinned titanium alloys through additive manufactu.. [1]
36. Bi-continuous Mg-Ti interpenetrating-phase composite as a partiall.. [1]
37. Automatically recognizing and grading spangle on the galvanized st.. [1]
38. Precipitate mediated plasticity at twin boundary in Nickel-based s.. [1]
39. Multi-ring Beam Sensing System for Three-dimensional Measurement o.. [1]
40. Corrigendum to "Bi-continuous Mg-Ti interpenetrating-phase composi.. [1]
41. Tailoring high-temperature mechanical properties of laser powder b.. [1]
42. Effects of oxygen on microstructure and mechanical properties of s.. [1]
43. Refinement of α′ Martensite by Oxygen in Selective Laser Melted .. [1]
44. Pseudo Sub-grain Formation and Evolution in a Ti3Al-Nb .. [1]