ShanghaiTech University Knowledge Management System
A physics-informed data-driven fault location method for transmission lines using single-ended measurements with field data validation | |
2024-11 | |
发表期刊 | ELECTRIC POWER SYSTEMS RESEARCH |
ISSN | 0378-7796 |
EISSN | 1873-2046 |
卷号 | 236 |
发表状态 | 已发表 |
DOI | 10.1016/j.epsr.2024.110943 |
摘要 | Data driven transmission line fault location methods have the potential to more accurately locate faults by extracting fault information from available data. However, most of the data driven fault location methods in the literature are not validated by field data for the following reasons. On one hand, the available field data during faults are very limited for one specific transmission line, and using field data for training is close to impossible. On the other hand, if simulation data are utilized for training, the mismatch between the simulation system and the practical system will cause fault location errors. To this end, this paper proposes a physics-informed data-driven fault location method. The data from a practical fault event are first analyzed to extract the ranges of system parameters such as equivalent source impedances, loading conditions, fault inception angles (FIA) and fault resistances. Afterwards, the simulation system is constructed with the ranges of parameters, to generate data for training. This procedure merges the gap between simulation and practical power systems, and at the same time considers the uncertainty of system parameters in practice. The proposed data-driven method does not require system parameters, only requires instantaneous voltage and current measurements at the local terminal, with a low sampling rate of several kHz and a short fault time window of half a cycle before and after the fault occurs. Numerical experiments and field data experiments clearly validate the advantages of the proposed method over existing data driven methods. © 2024 |
关键词 | Data mining Electric power transmission Location Numerical methods Transmissions Data driven Data validation Data-driven methods Field data Location method Physic-informed data-driven Simulation systems Single-ended Systems parameters Transmission-line |
URL | 查看原文 |
收录类别 | EI ; SCI |
语种 | 英语 |
资助项目 | National Natural Science Foundation of China[52377114] |
WOS研究方向 | Engineering |
WOS类目 | Engineering, Electrical & Electronic |
WOS记录号 | WOS:001297182100001 |
出版者 | Elsevier Ltd |
EI入藏号 | 20243316884192 |
EI主题词 | Electric lines |
EI分类号 | 602.2 Mechanical Transmissions ; 706.1.1 Electric Power Transmission ; 706.2 Electric Power Lines and Equipment ; 723.2 Data Processing and Image Processing ; 921.6 Numerical Methods |
原始文献类型 | Journal article (JA) |
文献类型 | 期刊论文 |
条目标识符 | https://kms.shanghaitech.edu.cn/handle/2MSLDSTB/411221 |
专题 | 信息科学与技术学院 信息科学与技术学院_PI研究组_何旭明组 信息科学与技术学院_PI研究组_刘宇组 信息科学与技术学院_硕士生 信息科学与技术学院_博士生 |
通讯作者 | Liu, Yu |
作者单位 | School of Information Science and Technology, ShanghaiTech University, Shanghai, China |
第一作者单位 | 信息科学与技术学院 |
通讯作者单位 | 信息科学与技术学院 |
第一作者的第一单位 | 信息科学与技术学院 |
推荐引用方式 GB/T 7714 | Zou, Xinchen,Xing, Yiqi,Lu, Dayou,et al. A physics-informed data-driven fault location method for transmission lines using single-ended measurements with field data validation[J]. ELECTRIC POWER SYSTEMS RESEARCH,2024,236. |
APA | Zou, Xinchen,Xing, Yiqi,Lu, Dayou,He, Xuming,&Liu, Yu.(2024).A physics-informed data-driven fault location method for transmission lines using single-ended measurements with field data validation.ELECTRIC POWER SYSTEMS RESEARCH,236. |
MLA | Zou, Xinchen,et al."A physics-informed data-driven fault location method for transmission lines using single-ended measurements with field data validation".ELECTRIC POWER SYSTEMS RESEARCH 236(2024). |
条目包含的文件 | 下载所有文件 | |||||
文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 |
修改评论
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。